AgiBot G2 (Genie G2)

What the G2 is

The AgiBot G2 (Chinese name 智元精灵 G2) is what AgiBot calls an “industrial-grade interactive embodied operation robot” — a full humanoid upper body (a 3-DoF neck, two 7-DoF arms, a waist) mounted on a four-steerable-wheel base rather than on legs.

AgiBot launched the G2 and started production on the same day, 16 October 2025, at an event in Ningbo held jointly with PIA Automation (均普智能), per the company’s own Chinese product page.

Verified specifications

Specs with no public source: AgiBot describes assembly accuracy as “sub-millimeter” / “亚毫米级” but has never published a repeatability figure, so that field is left blank. Also unpublished: operating temperature range, noise level, total chassis carrying capacity, service life / MTBF, and price — worldwide as well as in Thailand. We leave all of these out rather than estimate, and we do not import numbers from reseller listings.

Confirmed deployments

Longcheer Technology, Nanchang factory — AgiBot’s press release of 29 June 2026 reports the results of six consecutive days of livestreaming from a live tablet mass-production quality-inspection section: more than 64 hours of operation, 64,828 production-line tasks, more than 4 production workflows, a 99.99% task success rate and cumulative line output of 17,625. AgiBot stresses this was a running production line with moving materials, human operators and surrounding equipment, not a lab demonstration.

The 15,000th unit — the release of 28 June 2026 states that the 15,000th robot to come off AgiBot’s production line is a G2, and that the late-June factory livestream featured the G2 across roughly 100 cumulative hours.

Station-level figures from Longcheer — The Robot Report (16 April 2026) reports throughput of up to 310 units per hour, a cycle time of roughly 19–20 seconds, line integration completed within 36 hours, and more than 140 hours of cumulative continuous operation with downtime loss below 4%. That set of numbers comes from press coverage, not from an AgiBot release, so it is attributed separately.

First commercial work — AgiBot’s Chinese product page states that the G2’s first commercial deployment was on Joyson Electronics’ (均胜电子) seatbelt buckle lock-core production line, and that the launch event demonstrated four scenarios: automotive-parts work, inserting a RAM module using on-robot reinforcement learning (the company says it took an hour to learn), parcel feeding in logistics, and commercial guided tours.

Price and the Thai channel

No public price, in Thailand or anywhere else. AgiBot publishes no price for the G2 on its product page, in its press releases or in its store; the G2 page routes to a sales contact form. This page therefore leaves the price field empty and converts nothing from any currency.

The Thai channel exists. AgiBot held APC 2026 Thailand in Bangkok on 25 June 2026 with local strategic partner VST ECS (Thailand), opened a Thai partner recruitment programme, and said its “AgiRaaS” robot-as-a-service model is available in Thailand through flexible leasing. No rate has been published.

Who should skip this one

• Plants with steps, high thresholds or split floor levels. The G2 has no walking legs; it rides on wheels. AgiBot claims compatibility with “over 95%” of factory floors but does not state the obstacle height it can clear.
• Heavy lifting. The rated load is 5 kg per arm. For anything heavier, or for palletising, AgiBot points to the G2 Max — which has no public spec table yet.
• Wet or wash-down environments. IP42 means protection against solid objects over 1 mm and vertically dripping water only; the arms are IP50. This is not built for wet food lines or wash bays.
• Narrow aisles and weight-limited floors. At 185 kg on a 640 × 760 mm base, aisle widths, lifts and raised floors need checking first.
• Lines that cannot pause, without room for a dock. Runtime is about 4 hours per cycle. Round-the-clock operation depends on battery swapping or a charging dock, and that floor space has to be planned in.
• Anyone who needs to fix a budget first. With no public price at all, there is no way to budget in advance — you have to go through a quote process.

Compare with the brand’s bipedal models at AgiBot A3 and A3 Ultra, see the rest of the range at AgiBot, or the full category at Humanoid.

Sources

• AGIBOT G2 — official product page, including the Product Specifications table (agibot.com)
• 智元精灵 G2 — official Chinese product profile (agibot.com.cn, 26 Dec 2025)
• AGIBOT G2 to adopt NVIDIA Jetson Thor as its core domain controller — official release (agibot.com, 25 Aug 2025)
• AGIBOT’s 15,000th Robot Rolls Off the Production Line — official release (agibot.com, 28 Jun 2026)
• AGIBOT Concludes Six-Day Real Factory Livestream — official release (agibot.com, 29 Jun 2026)
• AGIBOT Brings APC 2026 to Thailand — official release (agibot.com, 25 Jun 2026)
• AGIBOT Unveils Four New Products at WAIC 2026 (G2 Max) — official release (agibot.com, 18 Jul 2026)
• AGIBOT deploys semi-humanoid robots in electronics manufacturing — The Robot Report (16 Apr 2026)